Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How do join half inch PVC Pipe to 1 1/2 PVC
[ 1 Answers ]
I am replacing a 1 1/2" tub drain with a 2" shower drain. The existing 1 1/2 PVC Tub Drain leads into 2 " on the main sewer line. Is three a way to remove the 1 2/2 line (maybe ream out the 1 1/2 pipe thats fitted into the 2 "??
How do I connect 3 inch sch 40 to 3 inch copper . The o. D. Of the copper is 3 inch
[ 2 Answers ]
I am remodeling an old house with all copper plumbing except for the cast iron that comes out of the basement floor. Some of the copper drain line is bad so I am trying to connect to the copper with sch 40 3 inch pipe. I can't seem to find a no hub band to make the connection. The o.d. of the...
How do I connect a 2 inch cast iron pipe to PVC
[ 1 Answers ]
I am converting a bath tub into a shower and I have to move the drain away from the wall. After cutting the cast iron pipe, I need to connect it to a PVC trap and extend it vertically for the next step. How do I do the connection? Thanks, Jalal
1/2 inch copper straight stops?
[ 7 Answers ]
I am replacing the straight stops under my kitchen sink because I am redoing my kitchen and they need replacing. There are 1/2 inch OD copper lines that are coming up from the floor. I have been to Home Depot and Menards looking for stops for this size copper but I am not finding them. Do they...
How to connect 1 1/2 inch copper pipe to PVC
[ 2 Answers ]
I have a 1 11/2 in diameter copper drain pipe and need to connect it to a PVC pipe. What's the best way to do this? Thanks View more questions Search
|