 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a gromix shower control valve seems to be leaking
Its installed in a steam shower unit but its leaking behind the gromix combo unit can the chrome plate be removed and the leak repaired through there or do I have to cut through the back wall of the adjoining room to get at it
|
||||
Check out some similar questions!
Hi all, I'm desperate for some help here to get my bathroom back. By the way, I've read the other threads and the suggestions there don't quite apply so I'm going to ask: I have a three-way shower system and I've successfully replaced my shower fixtures & stems except for the diverter. The...
I have recently installed a shower in a newly framed bathroom. This bathroom was started from scratch so we framed it all and installed all the plumbing. The sink and toilet are installed and work perfectly fine. The issue however, is that I have a leaking showervalve. The leak is coming from...
When I pull valve button to divert to shower only, water still leaks from tub faucet.
Hi, I have a shower valve that is leaking. The house is 20 years old and I believe that the valve has not been replaced since construction. I need to know how to remove the valve. The only number I have is on the shower valve casing G 7105 Thanks, Alex B.
We have a three knob shower system. When the water runs into the tub a significant amount of water runs out of the central diverter valve (?correct term) knob. When this is turned water is diverted to the shower head. How does one determine how to remove and replace the diverter assembly, or could...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
