Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Replacing fan motor relay switch with upgraded switch
[ 4 Answers ]
Hello, I've searched online to locate a replacement fan motor relay switch for an old Fedders propane heating unit in my greenhouse. The replacement should be fairly easy to do, however the part I was needing ( RBM 84-20103-301A) was listed as obsolete and was replaced by (McQuay part #...
Relay switch for furnace
[ 1 Answers ]
Have electric furnace with heat pump. Replaced thermostat and now the emergency heat will not work. Thought I might have hooked up wrong so I called maker of thermostat and talked with them. They said the wiring was correct. The heat pump works and the blower comes on when emergency heat is on but...
Looking for relay switch
[ 1 Answers ]
Looking for part number AZ2280-1C-24A(204) relay switch for intertherm central air unit.
Furnace relay switch
[ 13 Answers ]
After duct cleaning my furnace (heat and air) does not work anymore. The thermostat indicates the system is on. Furnace light is on but the fan is not turning. There is that switch that you press when you open the door to the furnace. I guess is a relay swtich. On when door is closed and off when...
Light Switch w/ relay?
[ 1 Answers ]
I am attempting to replace a bunch of old light switches in my house - with new ones. My current dilema - I pulled one off the wall that controls a ceiling light. There are 3 small wires going into the switch - It's a rocker style switch - you push one way for "On" the opposite way for "Off" and... View more questions Search
|