Ask Experts Questions for FREE Help !
Ask
    kluttermyworld's Avatar
    kluttermyworld Posts: 5, Reputation: 1
    New Member
     
    #1

    Sep 11, 2010, 07:40 PM
    Help for Microsoft works
    I'm trying to print a table I just finished and the lines are not showing up on the printed doc. I can't find any way to correct this problem. I am using works 8.5. Any help would be appreciated!
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
     
    #2

    Sep 12, 2010, 12:52 AM
    Hi, kluttermyworld!

    Is everything lined-up correctly though, even without the lines being there, please?

    Thanks!
    kluttermyworld's Avatar
    kluttermyworld Posts: 5, Reputation: 1
    New Member
     
    #3

    Sep 14, 2010, 10:33 PM

    Hi, Yes, everything is lined up. However, I created columns in tables and I wonder if that may be a problem. In othewords, I used the left side and then started to use the right side as I continued. The other thing is could there be an error message to the printer? I appreciate your response!
    i2u2me69's Avatar
    i2u2me69 Posts: 2, Reputation: 1
    New Member
     
    #4

    Sep 26, 2010, 06:11 PM
    H I, did it just stop printing out , or has it being printing forms with lines in it?
    If you are still having problem, I have another P.C. with works on it ( not sure what ver.). Let me know..
    kluttermyworld's Avatar
    kluttermyworld Posts: 5, Reputation: 1
    New Member
     
    #5

    Sep 28, 2010, 04:54 PM

    Hi i2u2me69, It printed all pages with just a couple of horizonal lines on the first page only and that was all. It does print the vertical lines. Any suggestions?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Microsoft works [ 1 Answers ]

After computer crashed, Microsoft works would not reinstall so took it back to a restore point created after crash. I went through the motions of reinstalling but after restarting programme will not open. My computer is a compaq and Microsoft works was free on hard drive when purchased in 2005

Microsoft works [ 1 Answers ]

I have lost a file in Microsoft Works. I have searched but it doesn't seem to be anywhere. The page just went blank in the middle of typing. 40 pages have just disappeared. Can anyone help?

Need help with Microsoft Works [ 1 Answers ]

I get into my Microsoft works program to write letters and it will not allow me to type anything. It will allow me to type from my numbers pad but that is all it will allow. What is going on with this?


View more questions Search