 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Dryer motor bearing bad. Replacement motor locally is $178.00. Any rebuilts avail
Frigidaire Dryer Model FSE747GES1 has motor bearing that went bad. Motor model number is S58NXMRK-6797. Shaft did not turn. I've broken it loose and it is very tight. Thermal limiter must have killed it in the night as the motor will still hum trying to turn shaft. New motor from local supplier is $178.00. Any cheaper sources new or rebuilt? Anyone rebuild small motors anymore? Can bearing kit be purchased and installed without press?
|
||||
Check out some similar questions!
I have an earthquake tiller model 5020 with a 5hp briggs and stratton motor that I need to replace but I can not find the model of the motor. Does anyone know which motor replaces that motor or do you know the model number of the motor that was used on that tiller?
I have a mid 80s maytag dryer, very low usage, with those single center knob controls. From previous questions and answers I have sen on a related issue, I have determined the motor is the problem, this is why: when you try and start it , the motor groans but does not start, if you keep pushing...
This air conditioner (Brand Unknown) services a Mobile Home. It is located outside. It is a large square Metal housing that houses a compressor, two double shaft motors with fan blades on one end and squirrel cage blowers on the other end. One of the fans broke, the fan blades separated from the...
I have a Hayward FloMax pump driven by a 1HP AO Smith motor. While pulling the old bearings off, with a three fingered tool, believe it or not, I bent the threaded end of the rotor shaft. OK, when it wouldn't come off I whacked it. It is very slight but the impeller is not perfectly square in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
