Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
How big should the cut out be for a shower handle on a stall shower
[ 1 Answers ]
I am in the process of having a stall shower installed and the handyman has cut a large hole in the wall to get the shower handle through the side of the shower. This hole will be covered up by the metal covering for the shower handle but I'm concerned that there's such a large hole under the cap....
Replace or reuse tile from a spongy wall? Groute is not the best of shape.
[ 2 Answers ]
I'm sure I'll have to replace some sheet rock. Would it be better to use tile or the end piece of fiber glass from a four piece shower and bath set. I would like to go all fiberglass but my wife likes the tile. I mean this the upstairs bath... who is going to see it? Also I am going to have to...
Shower stall need height of controls and shower head
[ 1 Answers ]
Hi Am building a shower and require the height of the taps and the shower head
Fixing a hole in the plastic shower stall wall
[ 1 Answers ]
:confused: Hi I've got a hole in a shower stall wall that appears to have come from nowhere, other than the normal washing and maintenance of the wall with a wash cloth. Need to know what kind of filler and sealant to put in the hole to make sure that the hole is filled with a...
Turning walking shower stall into bathtub/shower combo.
[ 4 Answers ]
Question: Current shower drain (2" pipe) runs 5 feet, under slab, to vent stack (5" cast iron vent pipe) of toilet. Will need to move the drain 3ft to wall for new tub. After moving the drain, the complete length of the pipe will still be around 5 feet. We will have to reduce the drain line... View more questions Search
|