 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Bryant furnace won't shut off...
I have a Bryant Central Heat Air system. Recently my drain pan clogged and began to over flow in my loft. After discovering and removing water in the drain pan, I noticed my unit was working but wouldn't cool because the furnace wouldn't shut off. The heat was running the same time as the AC. I suspect one of two possibilities: mother board or furnace controller. Can the furnace be by-passed? If so how? Also is it difficult to swap-out the motherboard?
|
||||
Check out some similar questions!
Good afternoon all, My question is in regards to the Bryant 373LAV Downflow/Horizontal gas furnace. A good friend of mine called for my help because about a month ago, her furnace blower randomly began running all the time and the only way she could shut it off was to flip the breaker on the...
I have a Bryant Heat Pump, model# FC4CNF048. Earlier this year in the summer around August did replace the thermostat and contactor due to lightning strike to house. A/C worked fine during rest of summer, but recently switched to heat for the winter. Programmed thermostat recently for 4 diff temp...
I have a bryant 397h furnace and the blower will not turn off.I replaced the control center circuit board and still runs. Any suggestions?
Have a bryant furnace 20+ yrs old blower motor won't shut off even after desired temp. is achieved. New thermostat.
The blower on my 12-15 yr old Bryant keeps going ignoring the t-stat stetting. I taught it was the t-stat, I replaced it and it still does the same thing. About a year ago the board was replaced with a newer one that has a fuse (3 amps) And was told that with the fuse it would prevent it from...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
