Solder

jasmarie1 Posts: 57, Reputation: 0

Junior Member

Sep 8, 2010, 07:01 PM

Solder

Can hvac pro solderless be use on refrigirant linesets

hvac1000 Posts: 14,540, Reputation: 435

Heating & Air Conditioning Expert

Sep 9, 2010, 12:22 AM

NO. Silver braze only due to high pressure and vibration.

Add your answer here.

Check out some similar questions!

Solder [ 2 Answers ]

Can pre soldered copper fitting be used in air condition linesets

Solder Tips [ 2 Answers ]

I have a few questions about soldering with leadless silver-based solder and MAPP gas. Its my large (relative to me) sized project. Say two lengths of copper (hot and cold) each 15 feet with 6 fittings. For now, the copper is dry half-inch type L... I find it takes a while to heat a joint to...

Compression vs. Solder [ 6 Answers ]

Hi all. I have seen bits and pieces to the answer to my question in other posts, but not sure I have the complete answer, so I will ask it directly... Transitioning from copper to (C)PVC, are compression junctions adequate and/or recommended, or is it advisable to use soldered connections? ...

Lead solder [ 2 Answers ]

Is there any alternatives to resolder a lead solder joint besides lead?