Have 6mm ID pipe, move 10 lpm fuel. How much pressure

ekibaloe Posts: 2, Reputation: 1

New Member

Sep 8, 2010, 06:38 AM

Have 6mm ID pipe, move 10 lpm fuel. How much pressure

I have a 6 mm ID pipe, approx. 1/4 inch, and need to run between 10-20 liters per minute fuel through this line, how much pressure output in my pump?

Check out some similar questions!

1993 Honda Accord no start, no fuel pressure, changed fuel pump twice! [ 17 Answers ]

Was intermittent at first, would die when I was coming to a stop and would take a second to start back up and really pumping the gas pedal after it fired up. It would not start back up one time, got it towed to the shop and the mechanic quoted me $770 for a new fuel pump :/ so I told him I would...

How to start a TPI motor, new fuel pump,plugs, getting 45#'s of fuel pressure. [ 9 Answers ]

1989 Pontiac Formula 350 that won't start. New plugs, fuel pump, ECM, injectors are good, has spark. Out of options!

1997 prizm with new fuel injector and fuel pressure regulator keeps flooding [ 1 Answers ]

My 1997 Prizm ran well until 1 1/2 months ago. One day during several weeks of wet weather, I was stopped at an intersection and the car stalled. It took several minutes of retrying and it finally started. I drove it home and put a can of dry gas into the fuel tank. It would no restart. A...

Fuel injecter or fuel pressure regulator ? [ 2 Answers ]

I have a 1996 gmc sonoma (zr2 package) with a 4.3 motor (engine code W). I sometimes have problems getting it started, when the motor is warm it starts without any problem, but when it is cold I have a hard time getting it started, if I put gas or starting fluid down the throttle body it starts...

View more questions Search

Check out some similar questions!

Add your answer here.