 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Excess water appears at the bottom of the Amana GUI/GCI Gas Fired Warm Air furnace
The unit seats on top of few bricks and stay inside metal tray. It has an overflow PVC water pipe from the tray for excess water to drain out from an attic. Water appears in the tray. What is the root cause of excess water and how do I resolve the issue. Thanks for the help.
|
||||
Check out some similar questions!
I am attempting to provide a customer with a TSSA inspection (Ontario) for their Beach oil fired furnace, this is a standard "trailer" furnace, compact in size intended to be installed in an alcove or closet. There is little or no info posted on the unit, whether removed or painted over, it has a...
I have a gas furnace and it sometimes will work perfectly fine and blow hot air and then other times it will be lukewarm. The high limit switch was replaced. What would be the other issue of not having consistent hot air coming out of blower?
I have an Armstrong-Air Gas-Fired furnace G1D91AU and maybe a programmable thermostat. The system is around six years old and it has started causing me problems this winter. The system has been inconsistent when following the preprogrammed settings. It will NOT warm above 70 degrees no matter...
Hi I have this 17 years old forced air gas fired furnace by Olsen. It has started to make humming noise when we turn it on. Does the blower motor need oiling. If anybody knows about it, please reply as how actually acess the motor to oil it or clean it. Thanks
We have a Carrier 9200 natural gas heat/air unit. The control box upstairs says HEAT and Heat ON but nothing is coming out of the vents. When we turn the FAN on, it blows out cold air but no heat. I have run the unit w/o the fan so I don't run up the elec bill... is there a RESET switch we can...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
