I just changed the pump on a whirlpool washer. Motor running. Won't spin or empty

jeanniem Posts: 1, Reputation: 1

New Member

Sep 4, 2010, 01:04 PM

I just changed the pump on a whirlpool washer. Motor running. Won't spin or empty

hkstroud Posts: 11,929, Reputation: 899

Home Improvement & Construction Expert

Sep 5, 2010, 05:13 AM

Have you checked belts, their tension and routing? Can you hear transmission changing when you change cycles?

Add your answer here.

Check out some similar questions!

Whirlpool washer will wash, spin, empty, won't go to rinse cycle [ 3 Answers ]

Whirlpool washer will fill with water, wash, empty water, spin but will not go to the rinse cylcle.. it just sits and hums. Any ideas?

Whirlpool washer won't agitate or spin [ 6 Answers ]

This machine is probably about 10 years old. It is a direct drive. The washer will fill and drain but when it tries to agitate or spin I hear a grinding and clicking sound coming from the bottom of the washer. I cannot turn the agitator by hand. Would this be a problem with the motor, or...

Whirlpool washer won't spin fast [ 0 Answers ]

I have a whirlpool washer that will not spin fast on the last spin cycle. The clothes are still wet even if I put them through another spin cycle. Any advice would be greatly appreciated. Thanks, jeannie

Whirlpool ultimate care II won't empty or spin [ 1 Answers ]

My washing machine washes fine but won't empty or spins just hums... any ideas?? Thanks for any help