 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Before I call a repair man would anyone here have an answer to why my oil burner will not kick on? Because of the cost of oil and the summer months offering some relief from the expense I decided to switch off the emergency switch so my expense on heating the hot water would be limited. For 2 days...
This season is the first time ever that this has happened. The furnace starts, gets a flame, runs for a while, then it flames-out. It sounds like the oil pump is still running (I hear like a spraying sound). Nothing shuts off. Then the flame will come on again, but may continue flaming-out...
I have a WeilMclain boiler with a becket burner. It seems to run fine when warming the house to tempurature will cycle on and off with no proble. Lately I come home and the boiler is out. I push the reset and it fires right up. It started doing this every 4 days now it is every day. Recently...
I have a Beckett AFG burner, the furnace is power vented and has a V1 head. The burner starts up then after about 10 sec trips safety. I have replaced electrodes and nozzle, thoroughly cleaned head and air tube. Yesterday I had a service man come and adjust air using CO2 sensor and a probe to...
The Beckett AFG caused some trouble this year when my grandchildren accidentally turned off the EMERGENCY OIL Burner switch at the top of the stair case.. For some reason it caused water to spray out flooding the floor. I'd like to know how this could be prevented? I was told by the repair man the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
