Ask Experts Questions for FREE Help !
Ask
    TTuazon's Avatar
    TTuazon Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 2, 2010, 01:11 PM
    Furnace Vent Motor
    I have a Lennox furnace with vent motor. After the heating cycle, the vent motor stays on. Is it controlled by the thermostat mounted on the vent housing?

Check out some similar questions!

Changing a 1 speed furnace motor to a variable furnace motor [ 1 Answers ]

I have a 30 year old natural gas ICG furnace with air with a one speed ac motor. Is it possible to change to a two speed, or a variable speed motor?

Motor starts but miller furnace will not fire then motor shuts off a off [ 3 Answers ]

Motor starts but miller furnace will not fire then motor shuts off

Condensation Build-up under Vent where Furnace vent exits Roof Line [ 4 Answers ]

I had a small water stain appear on my roof this winter and went up in the attic to find frozen condensation below the vent where both my water heater and my furnce exit the roof top. Do you have any suggestions on what could be causing this and how to rectify the situation.

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Goodman vent motor [ 12 Answers ]

I have a gmnt 80-4b furnace that stopped running. The vent motor is not getting any power. I have power at both sides of the high limit switch, power to the flame sensor, and power to one side of the pressure switch. Anybody know why I am not getting power to the vent motor?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.