 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a apartment size kenmore model 49722990 washer that drains very slowly
I have an apartment size kenmore model 49722990 washer. I had the pump checked and it is working and has power. When it gets to the drain and spin cycle, it drains very very slow and then shuts off before spinning. It took about 2 hours to drain a small load and I had to keep re-starting that cycle. It never did this before.
|
||||
Check out some similar questions!
Unit will fill and drain, but none of the cycles will start. Motor sounds like it is trying to run, but it only sounds like it is grinding.
The cold water on our Kenmore 80 series washing machine comes out very slowly when filling/rinsing. I've check all hoses/filters etc... What next?
I replaced the back outer tub and the inner drum(spider arm shattered) on my Kenmore front load washer. It still doesn't drain though the pump is working because the spin cycle doesn't work and it will only agitate extremely slow. Is it the motor control or the knob or maybe something else?
The spin cycle on my Kenmore series 90, model 110-24932200 works properly at times but often it will either spin slowly or not at all. I can hear the motor so it sounds like it is spinning but the basket isn't moving or if so, slowly. Any suggestions?
I have a Kenmore Washer Model 417.40042990. It washes, but is getting worse with time. Mostly, in order to complete a wash cycle in a reasonable amount of time, I have to manually "click" the knob to the next position on the dial within the wash cycle to continue and get it going. Sometimes it...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
