Ask Experts Questions for FREE Help !
Ask
    radiomane8's Avatar
    radiomane8 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 1, 2010, 09:02 AM
    Remote does not work properly
    I have a new ceiling fan replacing an old one. The new one has remote. I have hooked up the ceiling fan/light using the electrical wiring diagram. When I turn the power back on, the fan motor starts to turn. I tried to turn it off using the remote and the lights came on. I tried to us the light switch on the remote and nothing. If I use the low/med/high buttons for fan speed, the lights just change. What is wrong.
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    Sep 1, 2010, 09:15 AM
    Usually there are dipswitches in both the receiver and in the remote, that need to be set to the same settings, to allow both units to communicate with each other.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton bay universal remote not working properly. Has worked for years but now when [ 1 Answers ]

Hampton bay universal remote not working properly. Has worked for years but now when the fan is on at any speed and you turn on the light the fan stops. i.e. you can't run the light and the fan at the same time. Also when the light is off and you turn the fan to HI the light glows dim. All this...

Remote not working properly [ 3 Answers ]

In my remote for ceiling fan with the light fixtures only the delay off works for the lights. I do not know what brand it is as there is no markings. The light button does not work. I can on the lights with delay off and then it goes off shortly. How do I keep lights on. Is there any universal...

Samsung remote control not working properly [ 4 Answers ]

My fairly new Samsung TV has a problem with the remote. The TV will only react to the signal sent from the remote if the remote is pointed at a VERY small area on the TV. i.e. the lower right corner of the screen. Is there a fix for this?

Hunter fan w/ light & reversing switch on remote, remote not working properly [ 1 Answers ]

Hi, I have a Hunter fan with light and remote control, with reversible switch on the remote. RC was working fine until recently, and now, the fan will not turn off with it. I do not have a wall switch. The light works fine with RC, and the reversing also works, so does the fan speed. So, what...

Can't get Yahoo messenger to work properly [ 3 Answers ]

I can use Yahoo messenger to IM but it will not let me chat or use none of the extras such as IMviroments.Went to Yahoo messenger help and wanted me to re-download it but my computer will not let me.

View more questions Search