 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1992 acura integra 2p connector location
Need the location of the code connector where you short the plug and read the dtc of 1992 acura integra. We been looking for it but no luck. We already look under, side the console, remove the seat, rugs just to find this connector.
|
||||
|
||||
|
Need the location or picture of dtc connector for 1992 acura integra
Looking for a picture or diagram of 1992 acura integra called 2p connector where you short the 2p connector plug to read the code number or dtc. The car run bad hopping the code will tell me which sensors, valve, solenoid, egr and etc is bad.
|
||||
|
||||
|
|
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
1991 acura integra
[ 4 Answers ]
Hi I have another question for you. I have a 1991 Acura Integra with a idling problem. I've check the vacuum lines they were all good and I've also change my idle air control valve three times to make sure that wasn't the problem. I put another engine in the car but the person I bought the car off...
'94 acura integra, no spark?
[ 9 Answers ]
1994 Acura Integra won't start. Plenty of gas, CEL goes out after 2 seconds in ON position. The fuel pump does not sound like it's working during this time either, although it rarely did when running "normally". When key is turned to start, car sounds exactly as it should but no ignition occurs,...
Acura integra problems
[ 1 Answers ]
I have a 94 Integra w/159,000 miles and my steering wheel shakes at low speeds. What is causing this?
View more questions Search
|
