 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I replaced a hunter fan switch(ze-268sg) with a ljy-280. Now, there is
I replaced a hunter fan switch(ze-268sg) with a ljy-280. Now, the fan runs with "lo-hi-hi-hi" speeds: doesn't turn off. Are these 2 switchs compatible, or do I need to re-wire the wire leads? Is there a different wiring scheme?
|
||||
|
|
Check out some similar questions!
The fan switch on my hunter ceiling fan model #20537 is not working. What colored wires are supposed to go into the switch, and at what position on the switch? I have 3 wires, green, brown and gray. The switch has 4 slots, 3 L 2 1
A replacement ceiling fan switch was purchased from Home Depot for a three speed Hampton Bay (Marco Polo) ceiling fan. Both the old and new switch had the same wire colors (L-black 1-grey 2-brown 3-purple) and the new switch was inserted according to the colors. The fan will not turn off now. Is...
My wife and her mood pulled the fan speed cable and yanked it out of the fan. How can I remove the cover or get to the part so I can put the chain back in to turn on the fan. This is a hunmter 3 speed fan with 4 lights attached under the fan. I could not find the model number.
Hi everyone, Im new here. Well I have a 1987 Olsen Forced air furnace. I've been in this house now for about 4 months. I realized one day that the furnace fan didn't shut off. I did some searching and decided it must be a faulty fan limit switch. I got the correct Honeywell replacement limit...
I was just wondering if the light switch on a Hunter fan has to replaced with a Hunter light switch, specifically. The electrical guy at Lowe's in our area says 'no' that a light switch to a fan is 'universal.' The light switches they sold at the store could be used on any brand of fan. Could...
View more questions Search
| Question Tools | Search this Question |
|
