Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Sears Craftsman Lawn Tractor 17.5 HP B&S Engine
[ 2 Answers ]
Had a bad starter motor replaced replaced start solenoid and magneto. Tractor will now start and run fine for 5 minutes. Or so then die. Won't restart. Also replaced battery and did a tune up. Checked fuel solenoid and it's not shorted or open. Battery is charging when tractor runs. This is...
Craftsman lawn tractor engine problem
[ 11 Answers ]
I have a craftsman lawn tractor 10hp model 917.254220. The engine is a Tecumseh tvm220-157106h. The engine is seized up. Can anyone tell me the best option for a engine replacement. I can't find another tvm220-157106h. Thanks Jim
How to remove engine pulley on craftsman lawn tractor
[ 6 Answers ]
Hello, I have a Craftsman LT1000 lawn tractor (16 HP, electric start, 42" cutting deck"). The engine pulley which drives the drive belt for the rear wheels and the cutting deck has broken (the lower part of the top pulley broke off). I am trying to remove the engine pulley, but I cannot get...
Craftsman lawn tractor engine knock on startup
[ 3 Answers ]
I have a 1990 Craftsman 12 hp Briggs 38 in lawn tractor that has just developed a bad engine knock on starting, and sometimes at shutoff. Knocking goes away once running up to speed, and it seems to run smooth, with good power. Oil level is up, etc. What's the problem, is it a major engine...
Craftsman Lawn tractor engine dies
[ 6 Answers ]
I have a Craftsman lawn tractor (model #917-257481). The engine dies when I pull out the PTO switch to engage the mower. Have replaced PTO switch and the "clutch" switch. It still does it. I can hear the PTO engage. With the new "clutch" switch installed it also dies when you let out the clutch. I... View more questions Search
|