 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Home a/c condenser motor stops working
Condenser Fan Not Working
I turned fan by hand and it started to rotate on its own. After an hour of normal operation, the condenser fan stopped again The Cap Is 0/5mfd 370 VAC Could This Be Bad , Or Is It The Motor? Thank You Harley03joe |
||||
Check out some similar questions!
Thank you in advance for trying to help! We are advanced seniors and suddenly bnoticed that our Braeburn thermostat showed 86 in-house degrees and it became uncomfortably hot. We are in Arizona with current temperatures around 110 degrees :-( The in-house (furnace) heat strip unit is from Goodman...
I am replacing my Payne 1/4 hp condenser motor with an A.O. Smith multi HP motor. I'm also replacing the capacitor (a round three prong piece) with an oval (two prong piece). In looking at the wiring diagram I'm supposed to connect the wires as follows: the two brown wires to the capacitor,...
Is there a relay that triggers the Condenser motor? Also, I checked the voltage at the AC controller and it is at 26 VAC, is this a problem if it is intended to be 24?
Wiring looks good. Does it matter if capcitor is touching metal ? We had no way to attach the new capiter. The old capiter with 3 wires is enclosed in plastic tube, so we did not remove it, just bypassed it. New capiter has 2 wires, instead of 3. When we unplug the new capitor, fan still...
Hello, Monday, a/c condenser fan was making loud noise and within an hour of us noticing this, The condenser fan was froze up We replaced the condenser motor and capacitor . It appeared to be working fine for about an hour after new condenser motor and capacitor was in. House temp went...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
