Why we must install check valve at the discharge line?

rizaluna Posts: 2, Reputation: 1

New Member

Aug 19, 2010, 08:51 PM

Why we must install check valve at the discharge line?

Why we must install check valve at the discharge line?

KISS Posts: 12,510, Reputation: 839

Uber Member

Aug 19, 2010, 09:01 PM

Who, what, where, when and why?

A diode at the end of an electrical wire?

Add your answer here.

Check out some similar questions!

How to install a check valve [ 3 Answers ]

Our crawl space gets water in it all the time. I think I have determined that what is happening is that water from the ditch where the sump pump drains is backing up the pipe into the sump pump and back into the crawl space. I've dug the ditch deeper, but because of clay we can only go so far. I...

What is wrong when you have replaced the egr valve plus cleaned the line check engine [ 3 Answers ]

I have a 1999 camry. The check engine light keep coming on. I have replaced the EGR valve and cleaned the EGR valve plus the mounting pipe leading to the EGR valve and the throttle body.I used throttle cleaner. I have done this a number of times and the light comes back on. Could it possibly have...

Where to install a check valve [ 4 Answers ]

My dad installed a check valve on his sump pump... it works but the float doesn't turn off when the sump is empty... WHERE should the check valve be place on the system? Closer to the pump? Higher up on the vertical line? Or should it not matter and he has a different problem?

T&P Valve discharge line leaking water [ 10 Answers ]

I have a 3 year old gas water heater with an expansion tank. The water temp is set to 120 degrees. For the last couple weeks, the discharge line has been leaking water out of the overflow pipe. I've been told that simply replacing my T&P valve will not solve this problem. I had my water heater...