Ask Experts Questions for FREE Help !
Ask
    barbbee's Avatar
    barbbee Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 18, 2010, 03:55 PM
    Ge motors 5kcp39eg model V208-230 A1.40 made in India
    Is there any way to tell the age of this a/c? It freezes up often and it's too hot here
    In Las Vegas to go without air.
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
     
    #2

    Aug 18, 2010, 06:30 PM

    Give the condenser unit and the evaporater a good cleaning,, make sure the filter is clean,, just might make a difference and cost very little,
    The factory build date is sometimes on the tag/plate where all the other info is
    If it was built in India,who knows

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Comparison between single phase motors & three phase motors [ 3 Answers ]

Why single phase motors draws more current than three phase motors

Motion sensor control box made by Heath Co.. Model HB-4192 [ 1 Answers ]

I have a wall mount light and I think the motion sensor control box went bad in it. It was made by Heath Co. and the model Is HB-4192. Does anyone know where I can get one?

Have a refrigerator model frt21h7asb2. The refr. Made a block of ice on the evaporato [ 1 Answers ]

Have a refrigerator model frt21h7asb2. The refr. Made a block of ice on the evaporator. That does not let it cool well. What can I do to fix this plroblem. Thank you.

3 phase motors and single phase motors [ 4 Answers ]

Mike holt stated on one of his classes that in order for any eletrical equipment to work, that on one end had to be voltage and on the other side it had to have no voltage. So when the voltage goes to a three phase motor where does it go? Does it go to ground? I understand that the 3 phases are 120...

Panasonic LCD TV model #TC-26LX60 made March 2006 [ 1 Answers ]

I purchased this TV June 2006 and now the main video input is not working. Is this a part I can replace or do I need to have a professional repairman do it. What is the approximate cost.


View more questions Search