Ask Experts Questions for FREE Help !
Ask
    Londart's Avatar
    Londart Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2010, 02:41 PM
    Where to hook up voltage reducer from 48 volt to 12 volt on golf cart
    Do I just take 2 of the batteries which will give me enough (16v) or just take it downstream of 48v feed and then put in reducer? Just need it to run stereo and air horn relay.

    Thanks

    Dart
    cdad's Avatar
    cdad Posts: 12,700, Reputation: 1438
    Internet Research Expert
    		  
    #2

    Aug 18, 2010, 03:38 PM

    How many batteries are in the golf cart? Are they 6 or 12 volt deep cycles?

    If only 4 batteries then its either 24 volt (4x6v) or 48 volt (4x12v)

    If your using 6 volt batteries then choose 2 from either end. If 12 volt then just 1 from either end.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

110 volt versus 220 volt mini heat pump [ 6 Answers ]

I have enclosed my screened porch to create more living space(Florida Room). I am using a single zone mini split ductless heat pump for heating and cooling. It has been calculated that I need a 12,000 BTU unit. However, most of these units are available in 110 volts and 220 volts. The 220 models...

Can you run a 208 volt heating panel on 240 volt electrical supply [ 1 Answers ]

I have a baseboard electric heater that is 208 volts. My power supply is 240 volts. What will happen if I try to run m y 240 volt electrical supply to my 208 volt electric baseboard heater?

Want a convert 220 Volt AC to 110 Volt AC to run a stream Iron [ 3 Answers ]

I have the AC supply of 220Volt. But have received a stream iron which operates on 110 Volt AC. Can somebody suggest me how I can use this iron? If possible please let me know. Thanks with warm regards, Kamal Bhasin

Required AC voltage for 12 volt DC [ 1 Answers ]

If I use a diode bridge across a single phase a.c. supply to produce 12 Vdc, what should the rms voltage of the a.c. supply be

View more questions Search