 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Pilot light will not stay lite.
Have a gas hot water heater. Troubleshoot reads "Pressure Switch remained open longer than 5 seconds after the combustion blower was energized".
What/Where is the Pressure Switch? Solution reads "Pressure Switch tubing is not connected correctly" What/Where is the Pressure Switch Tubing? |
||||
Check out some similar questions!
Intertherm gas heater pilot lite won't stay lit.
[ 3 Answers ]
I have followed the directions, yet the pilot lite won't stay on.
My state select #GS650YBRT pilot light will not stay lite what could be the problem
[ 0 Answers ]
My State Select Hot water heater #GS650YBRT pilot light will not stay lite what is the problem?
If my Thermocouple is bad will my pilot light stay lite
[ 2 Answers ]
My pilot lite will go out once in a while.I don't it is not do to wind either.the furnace will work for a will and then I find the pilot out. It will relite and we go through the cycle again.
Water heater pilot light will not stay lite
[ 1 Answers ]
My water heater pilot lite will not stay lite. What do I need to do or replace to solve this issue?
Gas fireplace won't lite,pilot light is on
[ 7 Answers ]
I turned my gas fireplace on and the pilot lit fine and stays on but I can not get the main fire to go on. I have cleaned the thermocouple and other device on other side of pilot and also tried jumping the thermostat at wall and at fire place but no luck.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
