Ask Experts Questions for FREE Help !
Ask
    mitsubishi20's Avatar
    mitsubishi20 Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 8, 2010, 11:49 AM
    Replacing existing toilet
    Is there a toilet flange that will allow us to add 2 inches? We want to get a better toilet, (one that flushes relaibly, among other things0, ADA height and a linen, or biscuit color). Maybe the safest thing to do is to first take off the old toilet and then measure for what we need. What we have seems to measure 10 inches. It was a builder's weekend get-away house. Looks beautiful, but we have since had to fix all kinds of things in which he'd taken quality or installation short-cuts. Thanks!
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
     
    #2

    Aug 8, 2010, 12:38 PM

    I assume you are talking using an offset flange to move the toilet out to 12" Yes, you can get a flange for that. Sometimes not easy to do, particularly if you are on a slab. However, many of the companies offer what you want in a 10 inch offset. Check with them for availability of the model you like. I found HD has some 10" in stock at the local store.
    mitsubishi20's Avatar
    mitsubishi20 Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 8, 2010, 01:56 PM

    That was very helpful! Thanks!
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #4

    Aug 8, 2010, 02:59 PM

    To get the rough in size of your toilet measure from the baseboard to the center of the closet bolts.

    Rather then to tear out the old flange and replace with a 2" offset flange, ( which is not really your best option) shop for a 10" rough toilet. A 2" offset flange is the extreme limits of offset and we have had problems with them,
    Save yourself a lot of extra work and hassle and check out the 10" bowls. Good luck, Tom
    mitsubishi20's Avatar
    mitsubishi20 Posts: 3, Reputation: 1
    New Member
     
    #5

    Aug 8, 2010, 06:44 PM

    This was very helpful. Thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Replacing existing wall switch [ 2 Answers ]

I am replacing an existing toggle switch with a new dimmer. In the existing box, there are 2 white wires maretted together and not attached to the existing switch. There are 2 black wires screwed to the top screw of the existing switch and one red wire screwed to the bottom of the existing...

Replacing a coil for an existing Freus A/C [ 1 Answers ]

I have a new 3Ton Freus A/C and the 15year old 10 Sear 3.5 ton coil was never replaced. What should replace it? Do the coils come with Sear ratings? I was told yes and no buy some estimates . I only have 19" where the existing coil is now. I was told the larger the better but I don't have the room...

Replacing existing shower stall [ 1 Answers ]

I have a 32 inch sqare freestanding shower stall in my basement. I would like to put in something larger but don't want to break up the concrete to move the drain. Is it possible to purchase a shower base that does not have a drain already cut out so we can cut one where we want?

Replacing 70' of existing drain pipe [ 2 Answers ]

What is a fair price for laying new pipe and removing old? Is it reasonable for the plumber to ask to cut down a tree? Two trees? It seems that some type of repair where the problem area that is full of roots, cut be cut away and pvc laid in using end caps. Is that impractical?:confused:

Replacing existing shower set [ 3 Answers ]

Hi, I was a HomeDepot Expo today to buy new shower sets to replace the ones in our existing house (about 10 years old) and they told me something I wasn't sure was true. They said I should replace the old shower set (handles and shower head) with the same brand as the old one unless I planned to...


View more questions Search