 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Maytag Neptune front load washer
Moved washer from one location to another. Was correctly hooked up but now won't start. Getting power - the panel lights up. Water hook up and drain are fine. Someone told me it needed to be reprogrammed and there was a way to do this. I've checked the manual and called Maytag - nothing. Can anyone tell me how to do it?
|
||||
Check out some similar questions!
I have a 4 year old neptune maytag front loader washer machine. When it spins it is really loud. It sounds like a jet taking off. Do you know what would cause this? What it would cost to have it repaired by a repair man? Thanks for any help!
I am trying to replace the orifice in my gas dryer to convert it back to natural gas from propane. I bought the orifice kit, but it does not have specific instructions. I know I need to remove the front cover but do not know how to do this. I have a maytag neptune gas dryer, model # MDG9700AWW.
My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
