Ask Experts Questions for FREE Help !
Ask
    ckohut's Avatar
    ckohut Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2010, 12:10 PM
    toilet will not flush the shut value leaks when I turn it on
    The shut valve beside tank leaks when we turn it on. We tried to tighten it and toilet flushed for one day now tank will not fill up
    afaroo's Avatar
    afaroo Posts: 4,006, Reputation: 251
    Ultra Member
    		  
    #2

    Aug 6, 2010, 01:52 PM

    It is an easy fix if you tel us where is the angle valve leaking from, see the image below, Thanks.

    John
    Attached Images
     
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

When I flush my toilet it leaks at the main stack in the basement. What is happening [ 3 Answers ]

Just a quick question.

My water got shut off and now the pipes make noise when I flush the toilet [ 1 Answers ]

I have a two story house with two bathrooms upstairs. Recently my water was shut off by the city. I didn't know that it had been done until I flushed the downstairs toilet two or three times. I paid my bill and got it turned back on. Every since I got it turned back on the pipes make a deep humming...

Flush Valve Flapper on Toilet Snaps Shut [ 2 Answers ]

The Flush Valve Flapper in my toilet snaps shut when I try to flush so that I have to hold the handle down or the flushing cycle stops. Does anyone know what I need to do? I have adjusted the chain to no avail. :mad: Thanks for any help.

Toilet water shut off valve leaks bad [ 2 Answers ]

I am trying to replace a water line into a toilet. I put the new shut off valve on, but it does not get tight. What can I do

My toilet won't flush unless we turn the water off and on [ 1 Answers ]

About five day ago my toilet started not to flush. We have figured out that if we turn the water off and back on after a minute that it will flush one time. We have to repeat that step every time we flush. We have a fluidmaster 400 series. What is wrong and how can I fix it? Thanks:confused:

View more questions Search