Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Ground/Neutral Bus in Main Service Panel - Is there a Difference?
[ 8 Answers ]
I'm preparing to provide new wiring to a sizable addition to a log home. Prior to beginning the new work I mapped my existing circuits thinking it best to correct any potential overloads in the existing panel/circuit design before introducing any new problems on my own. Decided to make a few...
Neutral And Ground Bonding
[ 7 Answers ]
I am replacing my oven. Service at the main breaker's bus bar has neutral and ground in the same bus bar. Since the wire to the old oven is Aluminum, I will run Aluminum wire to a sub panel and use copper wire from the breaker to the oven. Do I bond the neutral bar to the sub box? I don't...
Bonding the neutral bar
[ 9 Answers ]
I have a 200amp main panel in my basement. I want to put a 100amp subpanel in my garage to service 2- 2pole 20amp circuits for 2 a/c condensers and 2- single pole 20a convenience circuits for the garage. My questions are 1 what size feeder wire would I need for the subpanel. (THHN in conduit) and...
Bonding neutral in a transformer
[ 1 Answers ]
If you bond your neutral in a transformerdo have to bond your neutral in a panel.
Where is the neutral bonding on my generator
[ 5 Answers ]
I purchased a milwaukee 4960-24 generator and need to remove the neutral bonding wire,any suggestions View more questions Search
|