Ask Experts Questions for FREE Help !
Ask
    jpburkey's Avatar
    jpburkey Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 4, 2010, 06:56 PM
    Repair sludged motor
    How do you repair a sludged 6.4 turbo diesel
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Aug 4, 2010, 07:21 PM

    I would use one of the full-synthetic HDDOs in the link below:

    https://www.askmehelpdesk.com/cars-t...ml#post1415281

    Change it every 3,000 miles, until it improves. The natural higher detergency of synthetics should safely clean the engine.

    This link may also help:

    https://www.askmehelpdesk.com/cars-t...ml#post2162069

    Auto-RX is another product that is highly recommended for sludged gasoline and diesel engines and transmissions. Only use Auto-RX with conventional diesel engine oil. You can check it out and buy it online.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

FSP 357822 washer motor repair [ 4 Answers ]

Our Kenmore washer hums when turned on and we believe it may be due to worn motor brushes. How can we be certain and if so, how do we replace the brushed in this motor?

Wiper Motor Repair [ 2 Answers ]

Where is the wiper motor on a 97 Dodge Grand Caravan and how hard is it to replace?:eek:

John Deere Hydrom Motor Repair [ 1 Answers ]

Does anyone have advise on repairing a RH wheel motor on a John Deere HD 75. The part number is AM124687, which has been changed to TCA13326. The RH side just stopped, belt is running fine, but no go. The issues is two fold, the cost for a new replacement is as much as the mower is worth, and there...

Repair of DC motor powered treadmill [ 1 Answers ]

My treadmill has lost its power/torque. It still operates normally except that when you step on it the motor can't pull the load. I'm wondering if it is a problem with the motor or a problem with the electronics supplying the power to the motor.

12.5 briggs and stratton motor repair [ 2 Answers ]

I have replaced conrod but have stuffed up settings. Do not know correct position of piston related to tapped setting

View more questions Search