Ask Experts Questions for FREE Help !
Ask
    gbgirl's Avatar
    gbgirl Posts: 3, Reputation: 1
    New Member
     
    #1

    Jul 31, 2010, 06:15 PM
    GE refrigerator water flow problem #GSS25WGT CC
    My GE fridge #GSS25WGT CC WATER DISPENSER is running very slowly, can someone help, we replaced the filter. It seems that when the filter isn't completely screwed in, runs better, but when I tighten it up more it runs very slow. Could it be the wrong filter? If so, what should I have? Also Ice maker not running as well. I assume its because of the water flow.
    Eman93's Avatar
    Eman93 Posts: 1, Reputation: 1
    New Member
     
    #2

    Jan 28, 2012, 10:26 PM
    This answer might be very very very late sir. But I seem to be having the same problem with the water flow, it seem that after I replace the filter the water flow is very weak and runs slowly. Sadly I don't know how to alleviate that problem but as for the Ice maker, the Ice will tend to not run because too much Ice as has accumulated in the ice maker machine, if you want to solve this problem every time the ice maker does not run check the Ice box compartment in the freezer, if you find that it is full of ice then there is your problem. That large amount of ice tends to block any ice from coming down. You can empty the ice box often in order to stop it from freezing all over.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

GE Refrigerator water dispenser [ 1 Answers ]

I have a GE Refrigerator Model # Gsh25kgrb, about a month ago it stopped dispensing water, I changed the water filter and reset it but no change, about 2 weeks ago I noticed my ice cubes were about 40% smaller than normal. I did a little troubleshooting and I have 120v at the water valve when the...

Water pooling in refrigerator [ 1 Answers ]

Water is pooling in the regular section of my fridge. Air flow is clear.

Connecting water to refrigerator [ 2 Answers ]

I have copper ice maker kit to connect. My coldwater suply goes from galvonized pipe to the flexable silver tubing, Can I connect the self piercing compression fitting onto the flexable silver tubing?

1995 Altima Idleing problem Knock & O2 sensor, EGR Flow Problem [ 1 Answers ]

I have 1995 Nissan Altima with 67,000 miles. When the car is idleing when I start it or when it is at a red light the rpm's go from 6000 to 9000. It sounds like I am reving the engine. The engine sounds fine when I am driving the car ( rpm's are consitent). I went to AutoZone the read out errors...

Water flow problem [ 2 Answers ]

Hello, Hot water just trickles out of kitchen faucet. Fine everywhere else. Home is 10 yrs old. 2 water heaters connected together. Have replaced faucet, checked everything else. Assume it is in the pipe that goes to sink. Question: Can I try and blow air pressure through pipe? My husband says...


View more questions Search