 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Trane board problems
When I turn on my trane unit the condenser fan motor stops after 5 min and the compressor stays on making a loud noise.I changed the fan motor and the capacitor but the unit is doing the same thing.My attention turned toward the board wish has a green flashing light. Any help or advice will be appreciated.
|
||||
Check out some similar questions!
Help! A/C unit went out last night. Opened inside unit up (Trane XE80) and pulled the 5 amp blade fuse on the control board and saw that it had blown. Replaced the 5 amp fuse, closed the panel, and the blower started. When I went to turn on the A/C, the 5 amp fuse blew again (and again). ...
Just moved into another house, and there are 2 - 2conductor cables disconnected from the furnace PC board One is from the a/c unit which turns on but doesn't kick on the furnace fan The other is from the main bathroom exhaust fan switch . This is a 2 pole switch ( 1 pole is the 120VAC for the...
Hello, Does anybody have any experience replacing the control board (CNT 03798) on a trane unit? I had an HVAC guy check out the unit, and he told me that was the part that needed replacing. I'd like to do it myself to save several $100.00 on the job, but I've never done it before. It...
Hi there... This is my first question and I would appreciate your expert help: The circuit breaker for my Trane central air unit tripped and upon further investigation, I found some sort of short circuit behind the Integrated Furnace control board CNT 2789. I saw a big spark behind the board...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
