Ask Experts Questions for FREE Help !
Ask
    washerdrain's Avatar
    washerdrain Posts: 6, Reputation: 1
    New Member
    		  
    #1

    Jul 28, 2010, 11:14 PM
    Clogged cooling water killed my blower for ac/furnace
    Drain tube was clogged and water overflow pan inside the furnace and It leaked all over the furnace. Now blower won't start? I tried to turn on heat and cold, just fan and nothing... I didn't found any reset button for blower engine... so I shut off electricity and now waiting for the unit to dry completely.Hoping that will do the job...
    Any suggestions anyone?
    Cheers!
    Victor
    washerdrain's Avatar
    washerdrain Posts: 6, Reputation: 1
    New Member
    		  
    #2

    Jul 28, 2010, 11:33 PM

    York furnace, ac, is working, thermostat working as well
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

45692-001 blower control board will not turn blower on in either heat or cooling mode [ 2 Answers ]

Armstrong G1N80 furnace blower control board will not turn on fan at all. Not in heat or cooling mode. I can hear a click when fan should be energized, but no fan startup. Pigtailed the fan hot and neutral,and fan works fine. Is this just a blower control board problem, or something else? We had...

Why does water leak from the carbon blower of a TempStar furnace? [ 0 Answers ]

Why does water leak from the carbon blower of a TempStar furnace?

Blower in furnace works in heating mode, not in cooling mode [ 5 Answers ]

The furnace is an older model Carrier. I do not know at this time the exact model. It is at this time about 20 years old. The central air is a newer Carrier Performance series model. It is two years old. I have checked to make certain the blower moves freely; it does. The blower in the...

View more questions Search