 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Low water pressure from water utility
I bought a house last year and since day 1 have not had hardly any water pressure. In the first month they dug up and replaced my curb valve, which didn't fix the issue. When they opened up the main coming into the house, water didn't spray out just kind of trickled. They did not put a meter on for PSI. Then I was told it was too cold and I'd have to wait till the ground thawed. Now they don't return my phone calls, and I can barely take a shower. What can I do? What's my next step?
|
||||
Check out some similar questions!
I'm still experiencing low hot water pressure even after replacing the water heater. When you first turn on the faucets the pressure will be fine but within a few seconds it drops again.
I flushed my water heater today. When I was done, the water pressure at all the sinks, tub, washer, dishwasher, etc worked just fine, except for the kitchen sink. I took out the aerator and confirmed there was nothing there. Ran the water without the aerator in and water pressure is still about...
I recently had a water line break in my front yard. The city replaced the line but ever since (immediately following the water being turned back on) the water pressure has been significantly lower throughout the house in both the hot and cold. I checked and the valve is completely open so I am...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
