 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I have a Kenmore Elite model #110-23032101 that won't spin
My washer will agitate, but not spin during the spin cycle. I can hear the motor going, but nothing is happening. Also, the fabric softener won't drain into the wash... don't know if the two are releated or not, but the part I care about the most is the lack of spinning!
Thanks |
||||
Check out some similar questions!
My Kenmore Elite Model 110.16982500 only makes a humming noise and will not drain or spin. Not an appliance guy and would like to avoid paying $200 to have someone come out and pull a switch and make it work... any ideas?
I have a Kenmore Washer model 110.23032101 that does not spin out completely. It seems to spin but sometimes the clothes are still wet when the load finishes. We have replaced the motor and this has not solved our problem. Any suggestions would be appreciated.
I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...
I had the drum stop turning, so I took the front cover off and cleaned everything including all exhaust ducting. I thought there was some sort of sensor fault from too much lint. It ran fine for 3 more loads. Now when you press the start button the dryer humms for a few seconds the shuts off. ...
My washer spins but does not get clothes dry in most cycles. Sometimes we can respin and it works but most times it does not. Any suggestions?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
