Ask Experts Questions for FREE Help !
Ask
    oyster37's Avatar
    oyster37 Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Jul 24, 2010, 11:09 AM
    What wattage bulb should I use for a fireproofed paper lantern?
    So I'm redoing my room and instead of spending lots of money on lamps and such I've decided to make my own. I saw these mini origami boxes lit by christmas lights and I'm thinking of doing the same but on a much larger scale. I've decided to use newspaper which is thin; making it easier for light to shine through, and has a certain aesthetic appeal. I've done a bit of research on fireproofing paper and I'm think of going with an alum and water mixture. I'm wondering what wattage bulb would be safe to use for these lights.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Sep 5, 2010, 11:18 AM
    I would suggest a CFL bulb, much cooler than incandescent
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Sep 5, 2010, 11:32 AM

    I wouldn't do it. Not without extensive research and testing of the materials involved. Too dangerous. A fire can be a terrible thing.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Upon installation of bulb, base of bulb burns and bulb never lights [ 1 Answers ]

Installed two new 3 bulb post lights on concrete entry piers, one bulb pops and burns the base immediately upon installation... I have checked the wiring and everything is wired correctly, I assume ths is a bad bulb socket and the fixture is defective, has anyone had this problem before?

Does removing one bulb from a two bulb flourecent unit reduce cost? [ 6 Answers ]

I am a General Manager for a company that has multiple large buildings. I have had it expressed to me by one of my investors that removing one of the two flourecent (32 Watt) bulbs from the unit will reduce cost by $30.00 a bulb a year! My simple understanding is that the ballast will run the same...

When using a 3 way bulb in a standard light socket, which wattage lights up? [ 2 Answers ]

When using a 3 way bulb in a standard light socket, which wattage lights up? Lets say you screw in a 50-100-150watt 3 way bulb in a standard on/off lamp, which wattage will turn on when you turn on the lamp. What happens if you put a 3 way bulb into a non-switched lamp, planning to use a foot...

Wattage used on a bulb with a dimmer [ 2 Answers ]

I have a 150 watt bulb in a living room lamp. The cord has a built in dimmer which we keep pretty well dimmed most of the time. Am I using the full 150 watts of electricity even when the bulb is not being fully lit?

Calculating wattage: each bulb, or fixture? [ 1 Answers ]

Hi there again. Thanks for all the useful help on this site. I think the last piece of info I need to complete my project is, when calculating wattages, (ex, 15 amp, 1440 watts max), if a light fixture has 4-60 watt bulbs, does that count as 240 watts or as one fixture at 60. Sounds like a...

View more questions Search