Lead to pvc joints

julianlp Posts: 1, Reputation: 1

New Member

Jul 24, 2010, 07:45 AM

Lead to pvc joints

Hi
I saw Barbara Wouters question mine is simply that do these joints come in all sizes as it looks like I am going to need to joint anywhere between 120mm and 40mm

Thanks Julian LP

Check out some similar questions!

Lead and oakum joints [ 7 Answers ]

I connected a pvc femaile adapter to a cast iron screwed male sewer connection. The lead and oakum joint is leaking. Ow do I repair it?

Lead solder joints in public buildings [ 4 Answers ]

To all the tradesman's here. Did anyone ever here anything about old solder being a health risk in public drinking fountains? We hear about the lead paint scare, The radon scare, the Mold scare, the asbestos scare. etc. But what about the old houses and schools etc that still have water lines...

Lead & olkum joints [ 3 Answers ]

What is the rope called . Used in pouring a horizontal lead joint. I always used to call it a running rope but is that really what it's called...

Removing cast iron / lead joints [ 4 Answers ]

Hi; I have a vertical 2 inch cast iron vent pipe that I need to remove to install a medicine cabinet. I have cut it in one spot with a sawzall, but there is also a joint in it where I would like to separate it. The joint appears to be poured with lead. If I heat it with a propane torch to get it...

How to work with lead joints? [ 3 Answers ]

Hello, I am in the middle of adding a bathroom in part of my garage. What is the best way to separate lead joints in cast iron pipe? My home was built in 1957 so I don't know if they were using the hemp type stuff to seal the joints then. The pipe sort of looks galvanized to me (It cut pretty...

View more questions Search

Check out some similar questions!

Add your answer here.