 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gravely Pro 150 Changed belt, blades still running in neutral?
I changed the belt on my Grarely Pro 150 and I installed the belt as diagramed. But now the blades still run when in neutral. I don't think it's the new belt because the drive gear runs even with the belt off. What could be wrong?
|
||||
|
||||
|
I have had this problem on a riding mower before. It ended up being that one of my pulleys on the deck was loose and it was meant to cause some drag on the bely. I replaced it with a new one and my blades stopped moving.if you can do it safely with gloves try putting resistance on the belt without forcing it onto the pulleys.(grab the belt in a long stretch with gloves slowly)
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Can
This guy goes through a maze to escape where the is a passage way with razor blades mounted on each side of the wall. When he makes it through and gets to the end there is a rotwiler waiting for him and he takes off in the direction he came from and when he gets to the passage way where the razor...
To whom ever can point me in the right Direction: I have 1995 Ford F-150 4x4 with a 5.8 L engine. The problem I'm having is when it runs it seems to run very rich... meaning I can smell fuel very strong in fact outside of the vehicle. someone told me maybe the fuel temp Sensor might need to be...
We replaced the belt on a 42in Craftsman mower. Pretty sure it on on correctly. Now when we try to engage the blades the amount of force we have to use seems wrong. Also even when the blades are not engages the belt is still spinning. 1. Is the belt still supposed to be moving even when the...
View more questions Search
|
