Ask Experts Questions for FREE Help !
Ask
    Larry1958's Avatar
    Larry1958 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 23, 2010, 06:15 AM
    Set timing on a 17.5 Briggs & Stratton Motor that is on a Troy Built Pony
    Set timing on a 17.5 Briggs & Stratton Motor that is on a Troy Built Pony
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
     
    #2

    Jul 23, 2010, 11:53 AM

    Check fly wheel key see if sheared.
    The only timing setting is inside the motor.
    That's where you line up the mark on the cam and the crankshaft.
    If its cranking hard you might check the valve clearence.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Timing problems Troy Built Pony Lawn Tractor [ 1 Answers ]

How do you set the timing on a troy built lawn tractor

Troy Built Pony problems [ 1 Answers ]

I have an '07 troy built pony. It keeps burning the belts off. Seems to slip only when the pto is not engaged. There is no tension on the belt. The smoke is coming from the crank pulley.

Troy built pony mower won't start [ 2 Answers ]

Troy built pony riding moerw stalled when the bade bearing frioze up, changed bearinf housind ,blade and belt ,will not even click the starter--where is the blade safety swith located so I can check it ?

Troy built pony tractor smoking [ 3 Answers ]

I have a troy built pony tractor about 2.5 years old, been used very little,yesterday while mowing it started blowing a tremendous amount of smoke from the exhaust while the blades were engaged I disengaged the blades and the smoke stopped, but if you engage the blades it smokes badly and the...


View more questions Search