Ask Experts Questions for FREE Help !
Ask
    dinologano's Avatar
    dinologano Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2010, 10:03 AM
    I need to remove the well water pump pressure switch.
    I need to remove the well water pump pressure switch. I'm sure the orifice is clogged AGAIN(two years ago). I did remove it, but forgot how I did it. Can you give me the individual steps to remove this switch?

    Deane
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Jul 20, 2010, 11:44 AM

    Here's a link that explains it all:
    Replacing a pressure switch
    Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Water Pump Pressure Switch [ 14 Answers ]

I own a large acre property and am having some plumbing issues. I’ll try and explain this best I can. The Old System: Water was pumped out of the well, through a pressure tank, a holding tank, and then a couple hundred feet up a hill to a 5000 gallon metal tank. From here the water was...

No cold water pressure after changing relay switch at well pump [ 3 Answers ]

We woke up one morning to no water from our well. My husband, who is no plumber, discovered that there were some bad wires on one of the relay switches on our pump. He and my dad changed it out. Now, our cold water has no pressure and it goes from cold to warm to cool to warm. As the past few...

Water pressure switch for above ground pump. [ 2 Answers ]

My pressure switch is shot. The points look to be burnt. I have filled them on several occasions and it continued to work. Now they doesn't seem to work, so I plan to replace the switch. Which size pressure switch do I need? 20/30, 20/40, 30/50 or 40/60 ? What determines the size switch?...

Water Pump Pressure Switch [ 9 Answers ]

I have a "jet pump" for our grey water cistern. I have problems with the pressure switch. It has a "Square D" pressure switch on it. When I manually tun the switch on "things work" but when I rely on it working automatically, sometimes it does and more often it doesn't. Especially if it is left...

View more questions Search