Ask Experts Questions for FREE Help !
Ask
    household10's Avatar
    household10 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jul 19, 2010, 06:53 AM
    Where is the learn button on Stanley garage door operner
    The power went out to the garage and I detached the door from the opener so I could open the door. When the power was back on I attached the door to the opener but now the beeping does not stop so I think somehow the door opener needs to probably be re programmed. I did not purchase the opener so I do not have the manual to check on how to re program. Can anyone one help?
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Jul 19, 2010, 08:10 AM

    I think the beep does not require reprograming which usually continues to stay in the memory of the unit even without power. Does the opener have a "doorbell button" in addition to a remote?
    household10's Avatar
    household10 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 19, 2010, 08:21 AM
    Yes the opener has a doorbell button in addition to a remote.
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
     
    #4

    Jul 23, 2010, 12:53 PM

    It could be a Learn button with LED's or DIP switches.
    I would unplug Operator for maybe 10 seconds, then Plug back in. Can't hurt, and works when electronics get in the "Confused" state.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Learn button for garage door opener remote. [ 5 Answers ]

I am a female and don't know too much about this subject, but here goes... I just purchased a Genie Model ACSGT Type 1 door opener remote through Ebay. The instructions that came with this "used but good condition" device from the owner stated: 'Press Learn button on opener - red light will...

Where is the learn button on my Blue Max garage door opener? [ 0 Answers ]

Where is the learn button on my Blue Max garage door opener? I'm trying to use a wireless key pad and the instructions say I have to use the learn button on my opener. I've taken all the panels off and still don't see a learn button.

Stanley garage door opener [ 4 Answers ]

I have a Stanley garage door opener . The Stanley remote opens the door very well ,but will not close the door. The button on the wall will close the door if you hold it in, only. As soon as you let go the door stops. How do I get the Remote to close the door?

Garage door learn button? [ 1 Answers ]

Where is the learn button for my craftsman garage door opener?

Garage door opener wall mount button [ 8 Answers ]

Just installed a stanley garage door opener model 810 and I tried to install the door mount button, but I'm having problems. The wall button is very similar looking like a doorbell in which I connect the 2 wires to the opener (motor). However when I connect, the door automatically opens, but when I...


View more questions Search