 |
|
|
 |
New Member
|
|
Jul 17, 2010, 08:22 PM
|
|
How do we remove the legs of an Adam Schaaf grand piano?
We want to move an Adam Schaaf grand piano. It is in its original location and movers could not remove the legs. The piano is in Chicago. How might we go about getting this piano moved?
|
|
 |
Uber Member
|
|
Jul 18, 2010, 01:48 AM
|
|
Hi again, suehenn!
Are you also in Chicago?
Most likely, the legs are attached to the underside of the piano via a pair of brackets - one part being on top of each leg and the other part being on the underside of the piano.
If there are screws in the legs affixing them to the piano, then those are removed first. If there's also a small piece of wood by the upper part of each leg that can be turned to be out of the way, then it needs to be turned.
That leaves the brackets. It helps to have a rubber mallet to get each leg loose by using it. Most of the brackets operate by pounding on the outside of the top of each leg toward the underside of the piano. If the legs have been attached for many years, it can sometimes take quite a bit of pounding to get them loose.
Please be sure to pad either the upper outside of each leg or the rubber mallet prior to doing any pounding.
One time I actually had a professional moving company call me up wondering how to move a grand piano!
Makes one wonder how they could call themselves professional, don't you think?
Thanks!
|
|
 |
New Member
|
|
Jul 18, 2010, 04:42 PM
|
|
Hi again,
Thanks again for responding. As I mentioned in my last response, I am in New Mexico, trying to help me sister prepare for moving the piano which is in Chicago.
We had to laugh when you mentioned the professional moving company, because we tried to have the piano moved earlier and they said that they'd never before not been able to remove the legs. They were able to remove the screws and pounded really hard with a rubber mallet, but in retrospect we think that perhaps the brackets are metal and that it is so rusted from years of no air-conditioning, etc. that the brackets may be rusted together.
I would like to refer you to my sister who was there when the first effort to move the piano failed.
|
|
 |
Expert
|
|
Jul 18, 2010, 04:46 PM
|
|
Email address removed
|
|
 |
Uber Member
|
|
Jul 19, 2010, 01:29 AM
|
|
Hi again, suehenn!
I didn't see the email address that was posted in your response.
However, once a thread has been started, all information needs to stay on the thread so that others with similar questions can benefit by the information that's exchanged. Also, there is the danger of someone getting spammed if their email address is exposed on a thread here. I would hate to see that happen to you or your sister!
How long is the piano from the front end of the keys to the back end of the case, please?
Thanks!
|
|
 |
New Member
|
|
Jul 19, 2010, 09:24 AM
|
|
Hi-
We won't be able to get that measurement until this weekend when my sister goes to Chicago. Thanks for your response - Sue
|
|
 |
Uber Member
|
|
Jul 22, 2010, 11:23 AM
|
|
I'll look forward to the information!
Thanks!
|
|
 |
Uber Member
|
|
Jul 25, 2010, 09:20 PM
|
|
Were you able to get the measurement, Sue?
Thanks!
|
|
Question Tools |
Search this Question |
|
|
Add your answer here.
Check out some similar questions!
Adam Schaaf grand piano serial #42673 what could it be worth?
[ 2 Answers ]
I have a Adam Schaaf CHICAGO grand piano serial number is 42673. It's in excellent condition. It was purchased in 1922 and it has the original bill of sale signed by Adam Schaaf. I would like to know what would the value range be for this piano. It also has the original bench seat that opens and...
Adam schaaf upright piano 1901
[ 3 Answers ]
Hello,
I have an Adam Schaff upright piano ,made in Chicago in 1901. The piano is in working order ,and all the pedals work. It does need a tuning.The piano has original finish,and a mirrored top. Does a piano of this type have any value?
Adam schaaf upright piano serial # 7727 what could it be worth?
[ 2 Answers ]
I have a Adam Schaaf Patent CHICAGO upright paino serial number is 7727. It's in good condition. The first year it was tuned was 1912. I would like to know what year it was made, and what would the value range be for this paino. It also has the original bench seat that opens and has storage...
View more questions
Search
|