Ask Experts Questions for FREE Help !
Ask
    inkjo252's Avatar
    inkjo252 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 17, 2010, 04:49 PM
    Canon bjc-2100 printer
    I recently got a Canon BJC-2100 but it has nothing with it, no cables,nothing. What kind of cables do I need? And what kind of ink cartridges does it take? I looked on the Canon site but it gave me a couple different numbers for ink. Alsp will it work with OS Windows XP? It said on the site for 95/98/2000 and NT.
    Scleros's Avatar
    Scleros Posts: 2,165, Reputation: 262
    Hardware Expert
     
    #2

    Jul 17, 2010, 08:50 PM

    At the time of this posting, Canon's web site seems to be down which is the authority for information and drivers for this printer. The Quick Start guide which I found on the web and attached to this post indicates it supports either USB or Parallel port connectivity. For USB, a standard USB A-B cable of desired length should suffice (shorter better). For parallel, a standard IEEE 1284 printer cable will likely work, however it also depends on what type of parallel port your computer has if it has one at all.

    Once working again, Canon's web site is the source for XP drivers. If the site does not have XP specific drivers, Windows XP includes a driver for this printer and the printer may be installed through the Control Panel > Printers & Faxes > Add Printer. A Canon supplied Windows 2000 printer driver would also probably work. Also note that a Canon supplied driver may be required for USB connectivity.

    The Quick Start Guide also indicates it uses a BJ-21e ink cartridge. The others you found listed on Canon's site may have been special purpose cartridges such as for high-capacity or photo printing.
    Attached Images
  1. File Type: pdf BJC-2100 Series Quick Start Guide.pdf (213.4 KB, 358 views)
  2. File Type: pdf BJC-2100 Datasheet.pdf (160.5 KB, 336 views)
  3. File Type: pdf BJC-2100 Product Service Details.pdf (17.7 KB, 204 views)
  4. File Type: pdf BJC-2100 Simplified Manual.pdf (317.1 KB, 2220 views)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Canon BJC-2100 print head [ 3 Answers ]

Hello, I've a problem with a printer Canon BJC-2100. When I turn it on, the print head moves in the middle and stops there, no matter the printer is connected or isn't connected to the computer. When I turn off the printer, the print head remains in the middle. What means this?? The print head...

Bjc 2100 [ 2 Answers ]

:confused: my BJC 2100 printer printed the night before I shut down my computer and the next morning I try to print nothing happens. The printer head moves to the center and remains there without printing. No paper is being spooled either. After a minute, error message "this document failed to...

Canon bjc 2100 big problem [ 5 Answers ]

Hi I have a canon bjc 2100 printer and no matter what I do when I print nothing comes ot on the page I'm connected via a printer cable I have brand new ink in the printer and I've also uninstalled it and reinstalled the drivers and still nothing comes out on the page but the printer goes through...

Another Cannon BJC-2100 Problem [ 1 Answers ]

I've just reloaded the printer onto my computer and now when I try to print it tells me there is a paper jam... except that there is no paper being printed.

Canon bjc 2100 [ 1 Answers ]

Hello. I have a canon bjc 2100 usb printer. I use a mac ibook running os 9.2.1 As far as I can tell the printer itself works. But lately when I try to print I get an error message saying that "the printer is in use or an error has occurred" (the error message is m311). I think it's my printer...


View more questions Search