 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Shower faucet replacement
I replaced an American Standard shower valve that was not allowing any hot water through the valve. Now the new replacement valve does not allow any cold water to be mixed when it exits the shower head. Is there any adjustment on the valve body that can be made to allow the right mixture to flow out to the shower head?
|
||||
Check out some similar questions!
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
I have a leaky shower head which is controlled by a Delta single arm control faucet, but I am not sure of the model number. How do I find the model number so that I can get the right repair parts. Which parts need replacing?
I just purchased a three handle shower faucet to replace my older worn out three Handle shower faucet. The new faucet came with a new brass shower three way diverter to be installed. Is there any way to use my existing three way shower diverter that is in the wall from my old faucet and adaptor...
I want to replace our current 3 handle Pfister Price tub/shower faucet and diverter with a Moen single handle system. I have full access to the pipes. Can anyone offer some good how-to advice. Thanks for your kind consideration.
Are water suppressors needed in the bathroom sink faucet and the shower stub out also? And can you just use a length of pipe on a T, or must you use those copper chambers? (cpvc system) thanks
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
