 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ge dishwasher gld5850
A few months back I had a power surge due to a faulty power line that supplies my house. My dishwasher wasn't connected to a GFCI breaker and a fuse on the tac-main control board blew out. I have replaced the control board and now the clean light always blinks and the dishwasher will not do anything. I think I need to reset the appliance but if there is a button sequence to push I am unaware of it.
|
||||
Check out some similar questions!
I am considering installing a dishwasher but do not currently have a garbage disposal. I was wondering if it was necessary to have one with a dishwasher? As of right now, I do not have an electrical hook-up for a garbage disposal. Also, I have an outlet near where I would place the dishwasher,...
My Kenmore dishwasher will not start and it is only 5 years old
I have recenetly purchased a dish washer and th guy who installed it hoocked it up with the cold water. The dishwasher oparates with cold water at the moment. How would I change it to the hot water? Can someone give me some sugestions. Thank you.
Would you please be able to tell me how to hook up the drain for my dishwasher. I have two waste lines from the wall. One for the sink and other for the dishwasher. I know normally you would just go into the tail for the sink, but I've never done it to its own waste outlet. Thanks Rick Today,...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
