Check out some similar questions!
Hi I think I ran my mower to low on oil as it has a shut down switch in it if the oil
[ 0 Answers ]
I have a murray rider, briggs straton, it has a built in low oil sensor (I believe)and I was mowing when it sputtered and quit. I checked the oil and it was barely registering, so I added oil let mower cool down and tried to restart it. Everything sounds just fine, like its going to start but just...
High water perssure after expansion tank installation
[ 5 Answers ]
Not sure what is going on - need an advice: 40 year old house with incoming water pressure regulator. Pressure with water running about 50 PSI, with faucets closed 60 PSI. When I had no expansion tank with all faucets closed pressure was slowly going to about 100 PSI while water heater was...
Oil pressure switch connection wire
[ 1 Answers ]
Where does the wire from the oil pressure switch that is located on a 1983 Nissan 720 pickup attach to?
Can you switch from oil to gas heat in old house?
[ 2 Answers ]
I need a new furnace in my 1955 house in CT. I was thinking of switching to gas heat... is this a good idea? I have no AC and was wondering if switching to gas might not be a good way to have AC along with a new system. Would appreciate any advice
When to switch to synthetic oil ?
[ 1 Answers ]
I recently purchased a new honda ridgeline which I really love. I plan on running synthetic oil but when should I switch ? I've heard that you should wait until the motor is fully broken in and I've also heard to just switch. Which is correct ? View more questions Search
Add your answer here.
|