Ask Experts Questions for FREE Help !
Ask
    butchjr's Avatar
    butchjr Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 9, 2010, 07:56 AM
    Goodman blower motor
    Unit is making a slight hitting or rubbing sound, I think it is coming the blower motor area, possible bearings starting to go bad. It is a Goodman 2.5 ton
    sdcodes's Avatar
    sdcodes Posts: 19, Reputation: 2
    New Member
    		  
    #2

    Sep 8, 2010, 11:59 AM
    Also possible fan blades are rubbing the casing - fan out of balance
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to replace blower motor goodman [ 1 Answers ]

How to remove - replace a blower motor on a Goodman AWB36-10CFR stud mount air handler

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Goodman Furnace Blower Motor Stays On [ 3 Answers ]

Hello, our Goodman furnace is malfunctioning. The blower motor runs non-stop. We are getting pretty cold now, it has been several days. I disconnected the thermostat and it made no difference. I suspect it may be a bad sensor, but do not know which one. The furnace is only 5 years old or so and we...

Blower motor wiring on a Goodman GMP [ 2 Answers ]

I have a Goodman GMP forced air furnace running on natural gas. It is about 5 - 6 years old. It recently went out. The draft inducer would come on and the igniter would glow but then it would shut down without opening the gas valve. I checked and found that the board was never sending a...

Goodman blower Motor [ 1 Answers ]

Where can I find a blower motor for a Goodman gas furnace?

View more questions Search