Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
I have SS duct (HVAC) to be connected to a Galvanized steel duct. Do I need dielectri
[ 1 Answers ]
Do I require dielectric washers to join the SS duct to Galvanized steel duct in HVAC duct network?
How do I connect duct work if duct tape won't hold?
[ 2 Answers ]
The elbo section of duct work in basement fell down from the duct it was connected to and previous owner had it connected with duct tape. New application of duct tape did not hold it for long. So what is the safest way to connect these two ducts or at least prop it up to the ceiling so it cannot...
Snapping Round Duct Together
[ 2 Answers ]
Hello, I bought all the ductwork needed to finish my basement, and what I thought was the easy part isn't so easy! I bought 5' round 6" duct from Home Depot. The kind where it is circular, but you need to snap it together to complete the circle. I can NOT get it snapped together! I feel like...
Flexible duct installation. Pros opinion needed.
[ 5 Answers ]
I have a 45 year ranch style, single level, 1400 sq. feet house in San Jose, CA. I had 45 year old day & night down flow furnace and no AC. I replaced it with Trane furnace and new Trane AC. I was paranoid about age of the system and thinking that duct work must be in bad shape, I got duct work...
Flexi Duct vrs Aluminum Duct
[ 4 Answers ]
I am adding an addition onto my house. The local building inspector has already told me my HVAC unit is more than adequate in size to support the addition. The old duct vents are aluminum. Can or should I use flexi venting in the new part? What are the pros and cons of these two types of vent... View more questions Search
|