Ask Experts Questions for FREE Help !
Ask
    jfor2010's Avatar
    jfor2010 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 7, 2010, 07:05 AM
    Dip switch settings for Hampton Bay AC552
    I cannot get the base off the unit where it attaches to the ceiling. Is that where the dip switch settings are? If so, how can I remove the base? Thank you.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #2

    Jul 7, 2010, 02:36 PM

    Often times yes. There is a decorative ring that covers the screws, it twists off.

    http://www.ceiling-fans-n-more.com/c...e-controls.php
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motion Sensor Settings for Hampton Bay Light [ 3 Answers ]

I have a Hampton Bay Exterior Motion Sensor Wall Lantern light. Model 248-523, Bar code 0-46335-90429-3. The light has two slide switches, one on each side of its base. I am missing the installation instructions and would like to know how to set the slide switches so I can have the light operate...

How to change DIP Switch Settings on a Gooman Air Handler [ 1 Answers ]

I have a Goodman AEPF 183016 air handler. How do I change the DIP swishes to add CPM? The product specifications state that you can speed up the fan using the #7 dip switch. Where are the DIP Switches?

Tempstar Air Handler Dip Switch Settings [ 5 Answers ]

We have a 3.5 ton Trane heat pump with a 4 ton Tempstar variable speed air handler (both units new in 2004). In January we were told that "all the dip switches were OFF"; so they had to have been that way since the unit was installed. The air flow has always been too strong so, at our request,...

Hampton bay reverse switch [ 3 Answers ]

I have a Hampton Bay ceiling fan with a faulty reverse switch. What I'd like to do is take the switch out and bypass the switch instead of replacing it. The switch is a six contact DPDT. Grey and white are the contacts in the center. Pink and Yellow are the contact at the bottom, and there are...

Hampton Bay fan switch [ 3 Answers ]

The chain on the fan switch broke of and I bought a replacement at HomeD. I forgot to tag the wires and can't seem to properly connect the 4 wire to the new switch. Cable colors are: White, Black, Yellow and Blue and the switch has an "L", #1, #2 and #3 where the cables should be connected. Does...

View more questions Search