Rheemcriterion2circulating fan blower not furceful

magee0523 Posts: 3, Reputation: 1

New Member

Jul 5, 2010, 09:46 PM

Rheemcriterion2circulating fan blower not furceful

Rheen criterion2 circulating not furceful enough

magee0523 Posts: 3, Reputation: 1

New Member

Jul 5, 2010, 09:48 PM

Need more powerful blower motor

magee0523 Posts: 3, Reputation: 1

New Member

Jul 5, 2010, 10:17 PM

Comment on magee0523's post

Need to add more furceful blower to furnace with the present one

Add your answer here.

Check out some similar questions!

Fan switch turns on AC blower, not the fan [ 8 Answers ]

I just moved into a new house and the digital thermostat is not working as I expect. When I turn the heat/cool swith to "off" and the fan switch to "on", the blower on the central air unit outside kicks on, but the fan in the inside unit does not. When I turn the heat/cool switch to "cool"...

T-start fan on/furnace blower on, AC w/fan on/auto, blower off [ 8 Answers ]

If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...

PVC Pipe Leakage, furnace Fan Does Not Stop, Blower Fan Works for 5 MIN and stops [ 1 Answers ]

1) I had water DRAINING from the furnace in the attic... it overflowed... the pan under furnace was beyond full. 2) I noticed leakage from one of the PVC pipes. 3) I simply replace the PVC pipe where water was leaking, but I forgot to put the PVC CEMENT. 4) I went to turn of the AC...

AC blower fan [ 4 Answers ]

When my AC turns on the fan doesn't always turn on when it is set to auto. Sometimes it does sometimes it doesn't. I can set it to on and the same thing happens. If it turns on It will stay on and turn back off with the rest of the unit. Right now I have to run the fan all the time so the unit...

Fan Blower doesn't come on in Fan,heat or cool [ 2 Answers ]

Yesterday I turned on my heat(coil in air handler) and everything worked fine. Last night I turned it on again and the fan wouldn't come on no matter where the switch was: fan only, heat or air. I made the appropriate temp changes for heat/air. There is a humming noise coming from the heating coil...