[ge01734]

MY Frigidaire clean light stays on after drying is complete. The dishwasher will not start at that time. When I reset the fuse box circuit breaker, the clean light goes off, and I can start the dishwasher. I read out the open and close switches, they read 0 ohms with latch closed, and infinity with the door latches open. Also, I took the front control panel off and it appears that the large 12 pin connector black wire between the control and timer circuit board and door latch is discolored with a blackish color. The circuit board also appears to have some discolored areas. It seems like it might be the board, but I am not sure. I tried to remove the board so that I could get a closer look underneath, but could not. I removed a screw on each end and it looks like the only thing holding it down are small plastic clips in slots on the side of the board. Thanks for the help.

Don