Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Tankless waterheater
[ 5 Answers ]
Hi, I bought a tankless waterheater to replace one waterheater with tank. The original breaker was 30 amp and the tankless requires 60 amp breaker and No. 6 gauge wire. My question is if I do not change the breaker and wire, what adverse effect it may have on the water heater itself? The...
Oil primary control reset will not reset.
[ 2 Answers ]
Oil primary control green light flashing. Will not reset due to loss of prime. Just Finished cleaning. Changed filter and obviously Has to be bled. AFG model Becket burner 2 years old. How do I get the reset to reset so I can bleed the system? All working till now. Bruce
Electric Waterheater reset
[ 3 Answers ]
I have a 50gallon electric water heater that after we take a shower(or do the dishes or anything using the hot water ) the water becomes cold and we have to reset the heater,then fine until water temperature drops below some point & we have to reset again. Why would this happen and what do I need...
Waterheater into popaine
[ 1 Answers ]
Can you convert a natural gas water heater into one that uses propane
State waterheater
[ 3 Answers ]
Water filling up in tray and running over onto floor. Cannot find where it is coming from. View more questions Search
|